Arrow Earring Blanks

Laser-cut hardboard Unisub coated sublimation earrings.

When selecting a size it will be the size of each individual piece, the measurement is from the middle of the piece. So if you select 1/2" the total length will be approx 1 1/2" before hardware.

Each earring is 1/8" thick. You will not receive the hardware for the earrings, those can be purchased online or at local craft stores. Earrings are sold in sets of 2.
Volume discount is per style
There may be slight browning around the edge on the protective film only when the protective film is removed, the substrate will be fine.

Pressing instructions:

**REMOVE PROTECTIVE FILM**

Press image at 400 degrees for 60 seconds with medium pressure.

The recommended settings above for sublimation may need
adjustments for the best results. Sublimation settings will vary depending on the
heat press brand and model ink and paper and atmospheric conditions.

Please join our Facebook group for specials. https://www.facebook.com/groups/369226993413461

The front side is glossy sublimation side, back is dark hardboard for the single-sided blanks.